The SensaHome solar outdoor lighting is flexible and environmentally friendly thanks to a solar panel. Thanks to the modern design, the solar lamps are an asset to any garden. This outdoor lighting set has no less than 2 x 24 LEDs. The lamps are fully charged within 7 to 8 hours with sufficient sunlight. The lighting works based on both a motion sensor and a night sensor. The stored energy is released when it is dark or when there is movement, depending on the setting. The sensors ensure that the lights turn on when there is movement so that your path is well lit.

The solar panels are charged. /span>by means of sunlight and stored in the battery. The 300 lumen light output of the SensaHome solar lamps is more than enough for bright lighting. This outdoor lighting is energy efficient due to the use of solar energy.

Benefits
✔ Night sensor
✔ Motion sensor
✔ Solar panel
✔ Smart lamp
✔ Dimming function
✔ Different modes
✔ Waterproof
✔ Bright and wide lighting range
✔ 24 months warranty
✔ Li-ion Battery 3.7V 4400 mAh

Solar lighting
Solar lamps represent green energy. These lamps have solar panels installed that capture sun and daylight and then convert them into energy. People often think that a solar panel only absorbs sunlight, but this is a common misunderstanding, because only daylight provides the solar lamps with energy. All solar lamps are also equipped with a twilight sensor. This means that the lamp turns on automatically when the sun sets or gets dark, and movement occurs.

Weather resistance
The Solar lamps are made for outdoor use and therefore the solar lighting is also very weather resistant. These solar lamps have a waterproof rating of IP65. Enjoy a lamp that can function well in all weather conditions. In addition, the lamp is dust-proof and suitable for places with blowing dust particles.

Easy to install
Installing the solar lamps is very easy. Thanks to the supplied plugs and screws, you can install the SensaHome solar lamps within a few minutes. Hang the lamps in a suitable place where they receive a lot of daylight. Finally, it is efficient to hang the lamps at a mounting height of 2 - 2.5 meters.

Automatic on/off
Once you purchase a solar lamp including a motion sensor, you never have to worry about turning the lamp on or off. The motion sensor ensures that the lamp turns on when movement is detected at a distance of approximately 8 meters. Of course you always have the choice to leave the lamp on continuously in a soft light.

Product specifications
➤ Brand: SensaHome
➤ Material: Plastic
➤ Lumens: 300 lm
➤ LEDs: 24
➤ Waterproof: ip65
➤ < span>Power: 0.5W/5.5V
➤ Motion sensor: Yes, detects from 4-8 meters
➤ Night sensor: Yes
➤ Settings< /b>: 3, dim, medium and strong
➤ Dimensions: 15 x 11 x 5 cm
➤ Weight: 0.5 KG
➤ Color: Cold
➤ Illumination range: 120 degrees
➤ Illumination time : 4-8 hours

Package contents
2 x SensaHome 24 LED
2 x Screws and plugs
1 x Instructions for use

How to use
The SensaHome solar lamps are easy to use and can hang on the walls or fence using 2 screws. The wall lamp is also waterproof, so you have sufficient light all year round. Provide a place where the lamp can receive sufficient sunlight. Do not hang the lamp too high (2-2.5 M) due to the motion sensor. Once the lamp is attached, you don't have to do anything else.