The SensaHome solar are flexible and environmentally friendly thanks to a solar panel. The modern design makes the solar lamps an asset to any garden. This variant wall lamp has no fewer than 24 LEDs. The lamp is fully charged within 7 to 8 hours with sufficient sunlight. This outdoor lamp works based on both a motion sensor and a night sensor. The stored energy is released when it gets dark during a movement. The sensors ensure that the lights turn on automatically so that your path is well lit. The solar panels are charged and stored by sunlight. The difference in power of the solar lamps is reflected in the number of lumens they have.

Advantages
✔ Night sensor
✔ Motion sensor
✔ Solar panel
✔ Smart lamp
✔ Dimming function
✔ Different modes
✔ Waterproof
✔ Bright and wide lighting range
✔ 24 months warranty
✔ Li-ion Battery 3.7V 4400 mAh

Solar lighting
Solar lamps represent green energy. These lamps have solar panels installed that capture sun and daylight and then convert them into energy. People often think that a solar panel only absorbs sunlight, but this is a common misunderstanding, because only daylight provides the solar lamps with energy. All solar lamps are also equipped with a twilight sensor. This means that the lamp will automatically turn on when the sun sets or it gets dark when there is movement.

Weather resistance
Solar lamps are made for outside and therefore the solar lighting is also very weather resistant. This solar lamp has a waterproof rating of IP65. Enjoy a lamp that can function well in all weather conditions. In addition, the lamp is dust-proof and suitable for places with dust particles.

Easy to assemble
Installing the solar lamps is very easy. You can install the SensaHome solar lamps within a few minutes using the supplied plugs and screws. Hang the lamp in a suitable place where the lamp receives a lot of daylight. Finally, it is efficient to hang the lamp at a mounting height of 2 meters.

Automatic on/off
When If you purchase a solar lamp including a motion sensor, you will never have to worry about turning the lamp on or off again. The motion sensor ensures that the lamp turns on when movement is detected within a distance of approximately 8 meters. Of course you always have the choice to leave the lamp on continuously in a soft light.

Product specifications
➤ Brand: SensaHome
➤ Material: Plastic
➤ Lumen: < /span>300 lm
➤ LEDs: 24
➤ Waterproof: < /span>ip65
➤ Power: 0.5W/5.5V
➤ Motion sensor: Yes , detects from 4-8 meters
➤ Night sensor: Yes
➤ Settings: 3, dim, medium and strong
➤ Dimensions: 15 x 11 x 5 cm
➤ Weight: 0.5 KG
➤ Color: Cold
➤ Illumination range: 120 degrees
➤ Lighting time: 4-8 hours

Package contents
1 x SensaHome 24 LED
2 x Screws and plows
1 x Instructions for use

How to use
The SensaHome solar lamps are easy to use and can be hung on the walls or fence using 2 screws. The wall lamp is also waterproof, so you have sufficient light all year round. Provide a place where the lamp can catch sufficient sunlight. Do not hang the lamp too high due to the motion sensor. Once the lamp is attached, you don't have to do anything else.